Nozzle Temperature:
250˚C – 270˚C

Printing Speed:
30 – 50mm/s

Bed Temperature:
90˚C – 105˚C

Chamber Temperature:
90˚C – 100˚C

Bed Surface:
almost any surface with a thin coat of PVA glue or MAGIGOO PC

Cooling Fan:
OFF

Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different printers and nozzle diameters

Young’s Modulus:
1832 ± 65 (MPa)

Tensile Strength:
39.9 ± 1.0 (MPa)

Bending Strength:
66.3 ± 1.3 (MPa)

Charpy Impact Strength:
25.8 ± 1.4 (kJ/m2)

Glass Transition Temperature:
109˚C

Vicat Softening Temperature:
135˚C

Melting Temperature:
N/A

Drying Settings:
80˚C for 8h

Recommended Support Materials:
PolyDissolve™ S2 (coming soon)

Other:
When printing with Polymaker™ PC-ABS it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress when not using a heated chamber.
Annealing settings: 90˚C for 2h