Coldroom doors left open for over-long periods increase energy costs significantly, so controlling door openings to reduce the flow of warm air and moisture will produce large energy savings, cut product deterioration and avoid Health and Safety problems such as door threshold icing. Our new Loheat ‘Speaking’ door open alarm is a very effective and inexpensive cost saving solution to these problems. The wall mounted steel alarm box is compact and easy to install and connect to the robust magnetic door sensor. It is suitable for sliding and hinged doors. The alarm is silent until activated by an over-long opening period via a variable time delay system. When activated the high visibility red flashing beacon is combined with a strong commanding voice instruction to close the door. This voice message is repeated continuously until the door is closed, when the alarm automatically resets. A green LED light confirms the power is on and the alarm is active.
The alarm also incorporates an externally readable counter which shows how many times the alarm has been activated. This provides useful management data and is easily reset to suit relevant timescales.
Alarm housing Compact white powder coated steel.

Base is pre-drilled for wall mounting and the cover secured with
tamper proof fixings.
Four cable entry and exit points to suit all installations.
Alarm housing dimensions H 220mm – W 155mm – D 90mm
Adjustable timer range 1 sec – 100hrs
Audio alarm Strong voice instructions
Alarm beacon High visibility 60 mm
Red LED bulbs, flash rate c 1Hz – EN54 part 3 approved
System live power indicator Green LED
Magnetic door position sensors Surface mounted, Aluminium housings, supplied with 500mm long
stainless steel armoured cable. Rated IP67
Power supply 240 volts AC x 50Hz
Alarm counter 6 digit, range 0-999999

Manufacturers Product 02.400.700