Exclusive Package only offered on the GSPEED Chassis website

Package includes parts pictured and listed here

- TGH forward motor mount, slipper plates, nut, washer and bearing 

- TGH Creeper T 30% overdrive transfer case with traditional scx10 three gear mounting hole pattern. Will mount to skid plates that come with GSPEED packages 

- TGH-V3 shock hoop brackets and mounting hardware

 Creeper T Specs-

• Domestic 7075-T6  Transfer cases, black or clear
  
• Case and shafts made in the U.S.A.
• Case hardened gears
• AX10 mounting pattern
• 30% overdrive
• 1.9:1 Front output ratio
• 2.6:1 Rear output ratio
• 29mm Short x 53mm Narrow x 15mm Thin
• 2 oz Light
• 2.5 x 12mm hardened pinned output gears
• AVID RACING sealed rubber bearings
• Greased w/ COW RC UDDER BUTTER

NOT INCLUDED AND NECESSARY PARTS TO COMPLETE

• • SCX10 skid plate (like skid plate in gspeed packages)
  • AXIAL AX31027 SPUR GEAR 56T 32P
  • AXIAL AX31068 SLIPPER PAD
  • 65mm to 75mm center drive shaft like https://supershafty.com/collections/drive-shafts/products/s4-supershafty-driveshafts?variant=32232971796574
  • M3 hardware to mount T case

- If using offset differential axles, like the AR45 and TRX4 axles you need to... 

1) Mirror the TGH-FMM motor mount. Here's an instructional video https://youtu.be/hqGZ6ldiAJo 

2) Mirror the Creeper T transfer case & mounted on driver side. Here's an instructional video https://youtu.be/v2ibIWRd9ps 

3) You must purchase the drilling jig kit for V1-C1 & TGH-V3 to layout for drilling new holes in the shock hoops to mount FWD Motor mount. https://gspeedchassis.com/products/tgh-mirrored-drilling-jig-forward-motor-mount-kit?_pos=1&_sid=c5b1d8d83&_ss=r 

4) The front upper suspension link bend will need to be rolled to the outside to avoid contact on the forward motor mount.