resør 2533 is a 4-channel mixer that covers all four festival seasons. Additionally, you can further customise your mix with external effects via Master Insert.

With added FX-bus, the resør 2533 FX offers plenty of possibilities by adding an external FX unit and apply those per channel.

Features

Channels 1,2,3: Line / Phono 
Channel 4: Line

Master Out (XLR, Balanced Stereo), Booth Out (TRS, Balanced Stereo), Record Out (RCA, Unbalanced) and Headphones (TRS, Stereo)

Master Insert (TRS, Unbalanced), Stereo (Tip - Left, Ring - Right, Sleeve - Ground)

2 band Baxandall Equalizer
Bass - boost and cut 12 dB (100 Hz)
Treble - boost and cut 12 dB (10 kHz)

100% discrete class A, 3 band master isolator, 24dB (< -90 dB of attenuation) “full-cut”, with maximum boost of 12dB. Crossover frequencies are at 310 Hz and 3100 Hz. True Bypass switch. IC-based and very transparent (FAQ page for more info)

Two NISSEI analog VU-meters provide a tactile level of L+R Stereo Mix signal (post summing)

Cue Select (route a stereo audio signal of any channel) 

Cue/Mix (blends stereo audio signal between Cue and Mix)

Techical specifications

Line Inputs

Discrete, Class-A Op-Amps 
Measured Line In to Master Out:
Frequency response +/- 0,3 dB, 20 Hz to 20 kHz
THD+N better than 0,004 %
SNR better than -95 dB

Phono Inputs

Discrete, Class-A Op-Amps, Gain 40 dB
Passive RIAA Equalization, polypropylene capacitors, close tolerance
Input impedance is 47 k ohm
Input capacitance is 47 pF
Measured Phono In to Master Out:
RIAA accuracy within +/- 0,3 dB (20 Hz - 20 kHz)
THD+N better than 0,02 % 
SNR better than -77 dB 
Maximum input signal level before distortion 100 mVRMS

Master Output

Balanced XLR
Unbalanced RCA L and R
Impedance < 300 ohm

Booth Output

Balanced TRS
Impedance < 300 ohm

Record Output

Nominal level -10dBV
Impedance < 300 ohm

Crosstalk

Channel Fader offness < -100 dB
Channel L/R separation <-70 dB
Isolator offness < -90 dB

What's included in price

100% class-A discrete circuitry
3 Years Warranty
External Power Supply Unit
24 dB (4-pole) 3 band discrete class A Master Isolator
Cue/Mix switch for the VU meter
Isolator True Bypass Switch

Dimensions and weight

DIMENSIONS
330 mm (W), 250 mm (D), 98 mm (H) - (please note that this does not include Knobs, Headphone Jack on the front side, RCA's and Sockets on the rear side of the mixer)

WEIGHT
Mixer: 4.5 kg
Power Supply: 1 kg