Dripper Stake Assemblies

Netafim Single dripper stake assemblies will reduce set up time considerably. This 24", 30" or 36" assembly will install right where you need it. Dripper assembly uses a 0.5 gph pressure compensating emitter with CNL check vale, 24, 30 or 36 inches of Super Flex Tubing and an angled barbed stake. Minimum operating pressure is 10 psi.

Delivering superior uniformity with slow, low-flow drippers for even and uniform soil wetting without the run-off.

The Netafim Dripper Stake Assembly is ideal for soilless substrates and hydroponic applications because each plant pot or rock wool cube receives an equal and precise amount of water nutrients.

The slower and lower flow wet the soil media thoroughly without any run-off around the edges of the container. This allows longer runs on smaller polyethylene supply laterals maintaining excellent uniformity while holding down system costs. The PCNL dripper feature ensures that each plant receives the same amount of water at the same time. A built-in check valve assures that all the drippers will turn on – when the system is fully pressurized – and off at the same time. Dripper Stake Assembly with PCNL dripper offers high performance for a very low cost per plant position.