A 4-light bath vanity light in black steel and glass, damp-rated for bathrooms and powder rooms.

The Kichler Erma collection pairs an industrial black steel frame with clear satin etched glass shades for a clean, utilitarian look. The four-light design spreads 32.5 inches across the wall, providing balanced illumination for grooming and makeup application. Rated for damp locations, it is a safe and practical choice for the space above a bathroom vanity.

Best for

• Bathrooms with a 36-60 in vanity, mounted directly over the mirror at 75-80 in above the floor
• Powder rooms or guest baths where a 4-light bar provides ample task light without glare
• Spaces with existing incandescent dimmer circuits - compatible with standard medium-base A19 bulbs
• Damp-rated locations - safe for bathrooms with shower humidity, but not direct water spray

Not ideal for

• Single-bulb sconce needs - this bar fixture spans 32.5 in and requires four bulbs
• Dry-location-only spaces - rated for damp, but no reason not to use it in a hallway or dressing room
• LED-only builds - uses standard medium-base bulbs, so you can swap in LED A19s if desired

How bright is it?

240 watts maximum with four 60W incandescent A19 bulbs (not included). Actual brightness depends on the bulbs you choose - with four 60W-equivalent LED bulbs, expect roughly 3000-3600 lumens total, suitable for a primary bathroom vanity or a medium powder room. For a dimmer accent, use lower-wattage or dimmable bulbs.

Light color and feel

Light color is determined by your choice of bulbs - the fixture itself runs on 120V AC. With warm-white incandescent or 2700-3000K LED bulbs, the glass shades diffuse a soft, warm glow that flatters skin tones and works well with most bath finishes. If you prefer a cooler, daylight tone for task lighting, install 3500-4000K LED bulbs. The fixture is dimmable when used with compatible dimmable bulbs and a standard incandescent dimmer.

Sizing and fit

The fixture measures 32.5 inches wide and 8.5 inches high, with a 6-inch extension from the wall. The backplate is 5 inches in diameter, covering a standard 4-inch octagonal junction box. The height from the center of the wall opening is 4.25 inches. Recommend mounting 75-80 inches above the floor, centered over a 36-60 inch vanity for best proportions.

Specifications

• Part of the Erma Collection
• Finish: Black
• Made of Steel
• Shade: Clear Satin Etched Glass
• (4) 60W A19 Bulbs
• Bulbs Not Included
• Socket Type: E26 (Medium)
• Voltage: 120 AC
• Length of Electrical Wire: 6 ft
• Light Source: Incandescent
• Energy Star: No
• Safety Rating: CETLUS
• For Use in Damp Locations
• Overall Dimensions: 32.5 in (L) x 8.5 in (H)
• Extension: 6 in
• Backplate/Base Dimensions: 5.00 in DIA
• Height From Center of Wall Opening: 4.25 in
• Item Weight: 5.22 lbs

Frequently asked

Are bulbs included? No, bulbs are not included. This fixture uses standard E26 medium-base A19 bulbs, up to 60W per socket.

Is it dimmable, and what dimmer should I use? The fixture itself is dimmable when used with dimmable bulbs and a compatible standard incandescent dimmer. For best results, use LED-rated dimmer if using LED bulbs.

Can I install this in a bathroom or outdoors? Yes, this fixture is rated for damp locations, so it is safe for bathrooms, covered patios, and other areas where moisture may be present but not directly exposed to water. It is not rated for wet locations such as direct rain exposure.

What's the warranty? Warranty information not specified by manufacturer. Contact Kichler customer service for warranty details.

What finish options are available? The fixture comes in Black as standard. The Erma collection also offers Brushed Nickel and Olde Bronze finishes - check availability for matching switch plates and accessories.