Liteplan ADM/1-K - DALI Self-Test LED Emergency Driver + Battery

The ADM/1 DALI 2 Certified Self-Test emergency control gear is supplied as a maintained/non-maintained emergency driver for integral mounting within a luminaire

A switchable maintained 3 hour emergency lighting driver that operates at 700mA in both emergency and mains operation. This unit primarily is designed as your emergency lighting driver, but can also be used for night lighting purposes via a separate timer switch, where required. The batteries used with this unit not only offer double the life of traditional emergency lighting batteries, but consume far less power during their operation. This module will power a single 3W (4V Max) LED chip.

• Suitable for Integral Mounting Applications
• Deep Discharge Protection
• 700mA Constant Current Output
• Extra Long Life LiFePO4 Batteries
• Can be Used for Night Light Purposes
• Can be Supplied with Emergency LED
• Fully DALI Compliant (IEC 62386-202)
• Switchable Maintained
• DALI 2 Certified Device
• Mains Supply 230-240V AC 50/60 Hz
• Max Ta and Tc Ta = 50 °C & Tc = 70 °C
• Power (Standby - Non-maintained) * 0.3W 8mA λ = 0.15
• Max Battery Temperature 55 °C
• Power (Charging - Maintianed) * 5W 28mA λ = 0.74
• Battery Discharge Current 900mA nominal
• Recharge Period 24-Hours
• Discharge Voltage Limit 2.5 Volts
• Battery Size & Type 3.2V 3.8Ah LiFePO4
• Battery Type IFpR27/67
• Mains Input 0.5mm² - 1.5 mm²
• Charge Current 225mA
• Bus Current Consumption 1.46mA
• Battery Fixing Centres 80mm x M4
• Module Weight 0.10Kg
• Module Dimensions (LxWxH) 135mm x 30mm x 21mm
• Battery Weight 0.11Kg Battery
• Dimensions (LxWxH) 90mm x 24mm x 28mm