Introduction :

The 11 kg.cm Metal Gear Servo Motor  

You  can  use  any  servo  code, hardware  or  library  to  control  these  servos,  so  it's  great  for beginners who want to make stuff move without building a motor controller with feedback & gear  box,  especially  since  it  will  fit  in  small  places.

servo motors you can position the motor shaft at a specific position (angle) using control signal.

The motor shaft will hold at this position as long as the control signal not changed.

This is very useful for controlling robot arms, unmanned airplanes control surface or any object that you want it to move at certain angle and stay at its new position.

Features :

• Weight: 55 g
• Dimension: 40.7×19.7×42.9mm
• Operating voltage range: 4.8 V to 7.2 V
• Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6v)
• Operating speed: 0.2 s/60º (4.8 V), 0.16 s/60º (6 V)
• Rotational degree: 180º
• Dead band width: 5 μs
• Operating temperature range: 0ºC to +55ºC
• Current draw at idle: 10mA
• No load operating current draw: 170mA
• Current at maximum load: 1200mA
• Operating voltage: 4.8 V a 7.2 V
• Temperature range: 0 ºC – 55 ºC
• Control System: Analog
• Operating Angle: 120degree
• Required Pulse: 900us-2100us
• Direction: CCW
• Operating speed: 0.2 s/60º (4.8 V), 0.16 s/60º (6 V)
• Dead band width: 5 μs
• Wire length: 30cm
• Connector: 3 pin 'S' type female header
• Weight: 55 g
• Dimension: 40.7 x 19.7 x 42.9 mm approx.
• Stall torque: 8.5 kgf·cm (4.8 V ), 10 kgf·cm (6 V)